Schneider Electric TSXETG100 User Manual download pdf (Page 104)

Setup

104

Configuration via

RS232 Serial

Link

For the first connection you must configure the components of your operating

system in order to be able to communicate with the TSX ETG 1000 module. All the

configuration steps are explained in a manual called 'Configuration of your computer

for TSX ETZ direct connection by serial link', delivered with the CD. Once these

components have been configured, follow the steps below:

Step Action

1 Connect an RS 232 crossed cable between a COM port on the PC and the 9-

pin SUB D socket on the TSX ETG 1000 module (see

Connection Cables,

p. 178

2 Establish the serial connection between the PC and the module.

3 Open your Internet browser on the PC.

4 In the "Address" field type: http://85.16.0.2, then press <Enter>.

5 The configuration index page appears: click the service you require.

6 Enter the default UserName "USER" and the default password "USER"

(without inverted commas), then press <Enter>.

Note: For subsequent connections, the IP address to be entered is always the

same, but enter the appropriate UserName and password if they have been

changed.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 191 192

No comments

Schneider Electric TSXETG100 User Manual Page 104