Schneider Electric TSXETG100 User Manual download pdf (Page 14)

Security

About the

TSX ETG 1000

If you want viewers to be able to access your site from the Internet and your

embedded server is protected by a firewall, you must configure the firewall to

authorize FTP traffic.

The firewall can be configured to authorize network connections to a limited range

of ports, or to authorize traffic to or from certain IP addresses. Firewalls configured

to allow data entry to 21 TCP/IP FTP port and to ports greater than 1024 authorize

access to protected embedded servers.

The TSX ETG 1000 client follows the "Firewall Friendly FTP" standard, RFC 1579.

It issues an FTP PASV command to the server before any attempt to establish an

FTP data connection.

The TSX ETG 1000 uses 80 TCP/IP port to provide HTTP access to web pages

saved to an embedded server. Access to operational data on a 502 TCP/IP port

uses the Schneider Electric Modbus application protocol (MBAP). The firewall must

also have access to the ports.

Note: The FTP name and password are ‘wsupgrade’.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 191 192

No comments

Schneider Electric TSXETG100 User Manual Page 14