Schneider Electric Magelis XBT GT Technical Information download pdf (Page 93)

Managing Online Applications

EIO0000000638 04/2012 93

Application Download with Firmware Change

The XBT GT/GK HMI Controller can download an application and change (either

upgrade or downgrade) the firmware from a USB memory key. You must first save

the application and the appropriate firmware version on a USB memory key.

To download an application and change the firmware of your controller follow the

steps in the table below:

NOTE: If you plug a USB memory key containing the application and firmware while

the controller is on, a screen is displayed asking you whether you want to install the

application from the USB memory key.

Saving your Application and Firmware on a USB memory key

You can save your application and firmware on a FAT 32 USB memory key. To save,

follow the steps in the table below:

NOTICE

Loss of Data

Always save your application and firmware version on a USB memory key.

Failure to follow these instructions can result in equipment damage.

Step Action

1 Turn off the power supply of your controller, prior connecting the USB memory key.

2 Connect the USB memory key containing the application and firmware into the USB

port of your controller.

3 Turn on your controller.

Result: The application and the firmware version from the USB memory key are

downloaded.

Step Action

1 Insert a USB memory key into the USB port of your computer.

2 Double click on HMI Application in the Devices window of your project.

Result: The project switches for the HMI and the main Vijeo Designer window

appears.

3 Right click on the controller node in the Navigator window, and select Properties.

Result: The Property Inspector window appears.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 123 124

No comments

Schneider Electric Magelis XBT GT Technical Information Page 93