Schneider Electric EER56100 Installation Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
S1B14481
Rev. 01, 08/2011
© 2011 Schneider Electric All Rights Reserved
Instruction Bulletin
Wiser™ EER56100 Thermostat Installer’s Guide
Retain for future use.
Description
The EER56100 is a precision digital thermostat for heating and cooling systems with 24 Vac control
wiring. The EER56100 thermostat supports the following systems:
Single-stage conventional heat/cool
Two-stage conventional (two-stage heat / two-stage cool)
Heat pump and geothermal heat pump (two-stage heat / single-stage cool)
Two-speed heat pump and geothermal two-speed heat pump (three-stage heat / two-stage cool)
Dual fuel heat pump and geothermal dual fuel heat pump
Humidifier and dehumidifier control
The EER56100 thermostat can be controlled locally and, as an energy management device, remotely
with a ZigBee
®
radio interface. It offers programmability, stand-alone operation, and communication
with utility systems and personal computers.
Electrical rating: 24 V; 2 A; 50/60 Hz
Maximum current: 2 A on any circuit, 3 A total
Safety Precautions
This section contains important safety precautions that must be followed before attempting to install,
maintain, or troubleshoot electrical equipment. Carefully read and follow the safety precautions below.
Installation Requirements
1. This equipment must be installed in accordance with all applicable codes and ordinances.
2. CE requirements must be observed for installation in Europe.
DANGER
HAZARD OF ELECTRIC SHOCK
Apply appropriate personal protective equipment (PPE) and follow safe electrical work
practices. See NFPA 70E.
This equipment must be installed and serviced by qualified electrical personnel.
Turn off all electrical power supplying this equipment before working on or inside the equipment.
Always use a properly rated voltage sensing device to confirm that power is off.
Replace all devices, doors, and covers before turning on power to this equipment.
Failure to follow these instructions will result in death or serious injury.
ENGLISH
Page view 2
1 2 3 4 5 6 7 8 ... 87 88

Comments to this Manuals

No comments